This page contains the complete list of all options supported by LinkCAD, as well as their defaults.
-LcLoadDefaults on the command line, it will load exactly these values, ignoring any changes to them made by the user.
The options are stored in the registry, under HKEY_CURRENT_USER\SOFTWARE\BayTechnology\LinkCAD.
You can load them from a file, if you wish, like this:
LinkCAD.exe -LcLoadDefaults -LcCommandFile="C:\My Documents\command.ini"
That way, you first load the defaults, and then overwrite some of them using the value from the ini file.
The default values of the options controlling dimensional units in the list below are listed using the unit name. The following table provides the corresponding integer value, which must be passed on the command line:
DotsPerInch = -2 Facets = -1 Nanometer = 0 Micron = 1 Mil = 2 Point = 3 Millimeter = 4 Centimeter = 5 Inch = 6 Meter = 7 Feet = 8 Picometer = 9
AcisInPlane = 0 // integer AnfOutAutoUnits = true // boolean AnfOutCmdAadd = false // boolean AnfOutCmdAglue = false // boolean AnfOutCmdFacet = "NORML" // string AnfOutCmdFilname = "" // string AnfOutCmdNummrg = false // boolean AnfOutCmdNummrgToler = 1.0e-4 // real AnfOutCmdStitle = "" // string AnfOutCmdTitle = "" // string AnfOutCreateVertexFile = false // boolean AnfOutExplodeArcs = false // boolean AnfOutMerge = true // boolean AnfOutModelType = 1 // integer AnfOutUnits = (int)Unit::Micron // integer AnfOutVertexFilePrecision = 5 // integer AnfV4OutUnits = lc::Unit::Millimeter // integer AsciiInScalingUnits = (int)Unit::Micron // integer AsciiInScalingValue = 1 // integer AsciiInType = 0 // integer AsciiInWidth = 100 // integer CifInFontAnchorH = 0 // integer CifInFontAnchorV = 2 // integer CifInFontSizeUnits = (int)Unit::Micron // integer CifInFontSizeValue = 1000.0 // real CifInIgnoreText = false // boolean CifInUnitsCents = true // boolean CifOutCleMode = false // boolean CifOutExplodeText = false // boolean CifOutFlatten = false // boolean CifOutFlavour = 5 // integer CifOutHeader = "(CIF written by LinkCAD);" // string CifOutLayerNameLength = 4 // integer CifOutLinefeed = false // boolean CifOutNoGlobalCell = false // boolean CifOutPolygonLimit = 400 // integer CifOutScaleDS = true // boolean CifOutSpaceDS = true // boolean CifOutSpaceL = true // boolean CifOutSplitPolygons = false // boolean CifOutUnitsCents = true // boolean CifOutUseBox = true // boolean CifOutUseRound = true // boolean CifOutUseWire = true // boolean CmdToolCropBounds = false // boolean DxfInEndcapType = 1 // integer DxfInExplodeSplines = false // boolean DxfInHatchProcessing = 0 // integer DxfInIgnoreText = false // boolean DxfInScaling = 1.0 // real DxfInTextLineWidth = 0.0 // real DxfInUnitsUnit = (int)Unit::Micron // integer DxfInUnitsValue = 1 // integer DxfOutBinary = false // boolean DxfOutEndcapType = 0 // integer DxfOutExplodeArrays = false // boolean DxfOutExplodeText = false // boolean DxfOutExportAsRegions = false // boolean DxfOutFillPolygons = false // boolean DxfOutFlatten = false // boolean DxfOutFormatVersion = 12 // integer DxfOutHatchPolygons = false // boolean DxfOutScaling = 1.0 // real DxfOutUnitsUnit = (int)Unit::Micron // integer DxfOutUnitsValue = 1 // integer GbrInApertureFile = false // boolean GbrInApertureFilePath = "" // string GbrInCoordinateMode = 0 // integer GbrInCustomApertureFile = true // boolean GbrInDrawMode = 0 // integer GbrInFormatXDec = 3 // integer GbrInFormatXInt = 4 // integer GbrInFormatYDec = 3 // integer GbrInFormatYInt = 4 // integer GbrInMergeLayers = false // boolean GbrInModalD03 = true // boolean GbrInModalG02 = true // boolean GbrInQuadrantMode = 0 // integer GbrInSupportD99 = false // boolean GbrInUnits = (int)Unit::Nanometer // integer GbrInZeroSuppression = 0 // integer GbrOutAbsCoordinate = true // boolean GbrOutCircularInterpolation = false // boolean GbrOutDecimals = 6 // integer GbrOutEobCharacter = "*" // string GbrOutFillPolygons = true // boolean GbrOutFlashCircles = true // boolean GbrOutFlashRectangles = false // boolean GbrOutForceDraw = false // boolean GbrOutIntegers = 3 // integer GbrOutLinebreaks = 0 // integer GbrOutParameterDelimiter = "%" // string GbrOutRectAptLimitUnits = (int)Unit::Inch // integer GbrOutRectAptLimitValue = 0.5 // real GbrOutRoundAptLimitUnits = (int)Unit::Inch // integer GbrOutRoundAptLimitValue = 0.5 // real GbrOutStepAndRepeat = false // boolean GbrOutSuppressLeadingZero = true // boolean GbrOutUnitsImperial = true // boolean GbrOutWidthUnits = (int)Unit::Micron // integer GbrOutWidthValue = 0.001 // real GbrOutWriteG54 = true // boolean GdsInFontSizeUnits = (int)Unit::Micron // integer GdsInFontSizeValue = 1.0 // real GdsInIgnoreDataTypes = true // boolean GdsInIgnoreText = false // boolean GdsInScaling = 1.0 // real GdsOutDatatypeFromLayer = false // boolean GdsOutDbScalingUnits = Unit::Nanometer // Units GdsOutDbScalingValue = 1.0 // real GdsOutExplodeText = false // boolean GdsOutFlatten = false // boolean GdsOutFontSizeUnits = Unit::Micron // Units GdsOutFontSizeValue = 1.0 // real GdsOutPad = true // boolean GdsOutScaling = 1.0 // real GdsOutSplitPolygons = true // boolean GdsOutUnwindPolygons = true // boolean GdsOutUserScalingUnits = Unit::Nanometer // Units GdsOutUserScalingValue = 1.0 // real Ie3dOutFormatVersion = 315 // integer Ie3dOutUnits = 2 // integer LcApplyLayerMap = false // boolean LcApplyLayerMapBatch = false // boolean LcAutoNumberMaterialValues = false // boolean LcAutoNumberZValues = false // boolean LcAutoWebUpdate = true // boolean LcBatchCombineFiles = true // boolean LcBatchToolsDeembed = false // boolean LcBatchToolsMerge = false // boolean LcBatchToolsOutline = false // boolean LcBatchToolsQuasiCircles = false // boolean LcConvertBatch = false // boolean LcDbUnitsValue = 1.0 // real LcDefaultDir = "" // string LcDefaultFont = "TXT" // string LcDefaultMapDir = "" // string LcDeleteEmtpyCells = true // boolean LcDeleteUnresolvedRefs = true // boolean LcDisplayUnits = (int)Unit::Micron // integer LcDumpMemoryUsage = false // boolean LcEnableUndo = true // boolean LcExitWhenFinished = false // boolean LcExperimental = false // boolean LcExportDir = "" // string LcExportFile = "" // string LcExportFormat = "DXF" // string LcFontMap = "lcad.fmp" // string LcFontPath = "" // string LcHideUnusedLayers = true // boolean LcHighContrast = false // boolean LcImportFile = "" // string LcImportFormat = "DXF" // string LcInResolveLayers = true // boolean LcLayerMap = "" // string LcMaintenanceExp = 0 // integer LcMaxCellDisplay = 10000 // integer LcNetworkPath = "" // string LcNoRestart = false // boolean LcNoTrace = false // boolean LcPrevVersion = 0 // integer LcRegistrationCode = "0" // string LcRegistrationCompany = "" // string LcRegistrationName = "" // string LcSaveSettings = false // boolean LcSelectTopCell = false // boolean LcSerialNumber = "" // string LcShowSplash = true // boolean LcShowTooltips = true // boolean LcSkipExportOptions = false // boolean LcSkipImportOptions = false // boolean LcSkipSteps = "" // string LcSubstrateExtent = 125 // real LcSuccess = true // boolean LcTextLineEndsSquare = false // boolean LcTopCellPattern = "" // string LcTransferData = "" // string LcTransferSerial = "" // string LcTransferUnlockKey = "" // string LcUserUnitsNm = 1000.0 // real LcWindowMaximized = false // boolean LcWindowPosX = -1 // integer LcWindowPosY = -1 // integer LcWindowSizeX = -1 // integer LcWindowSizeY = -1 // integer LvAccellerate = true // boolean LvBackgroundColor = 1 // integer LvBlendFunction = 1 // integer LvDisabled = false // boolean LvDisableVertexArrays = false // boolean LvDrawFilled = true // boolean LvGlAutodeskValidBackBufferHint = true // boolean LvGlKtxBufferRegion = true // boolean LvGlWinSwapHint = true // boolean LvHiliteBrokenPlines = false // boolean LvIntermediateDisplay = false // boolean LvIsAccellerated = false // boolean LvPixelPrecision = 2 // integer LvWglArbBufferRegion = true // boolean ModlaOutVertexLimit = 16 // integer PsInDrawText = 1 // integer PsInIgnoreClipPath = true // boolean PsInPage = 1 // integer PsInPstoeditOptions = "" // string PsInSubtractWhite = false // boolean PsOutBlack = true // boolean PsOutCustomDbScale = 0.01 // real PsOutCustomPaperLengthValue = 20.0 // real PsOutCustomPaperWidthValue = 20.0 // real PsOutDbScale = 0.01 // real PsOutFormatType = 0 // integer PsOutLandscape = false // boolean PsOutLayerCount = 1 // integer PsOutLayout = 1 // integer PsOutPaperLengthPt = 100 // integer PsOutPaperMarginValue = 2.5 // real PsOutPaperUnits = (int)Unit::Centimeter // integer PsOutPaperWidthPt = 100 // integer PsOutScaleMode = 0 // integer PsOutStandardFormat = 1 // integer RasterInGrayLevels = 8 // integer RasterInKeepWhite = "" // string RasterInMergeType = 1 // integer RasterInProcessing = 1 // integer RasterInScalingUnits = (int)Unit::Micron // integer RasterInScalingValue = 1.0 // real RasterInScalingValueY = 1.0 // real RasterOutScalingUnits = (int)Unit::Micron // integer RasterOutScalingValue = 100.0 // real SonOutSubstrateThickness = 25.0 // real SonOutUnits = 0 // integer SonXCells = 64 // integer SonYCells = 64 // integer TetinOutAutoUnits = true // boolean TetinOutExplodeArcs = false // boolean TetinOutTriangToler = 0.01 // real TetinOutUnits = (int)Unit::Micron // integer TextLineWidthRel = 0.05 // real TlcOutFlatten = false // boolean TlcOutUserUnits = 20 // integer ToolAddWidthToPolygons = true // boolean ToolApply = "" // string ToolArcPrecUnits = (int)Unit::Facets // integer ToolArcPrecUnits = Unit::Facets // Units ToolArcPrecUnits = Unit::Facets // Units ToolArcPrecValue = 32 // integer ToolArcPrecValue = 32 // integer ToolArcPrecValue = 32 // integer ToolAutoFlatten = false // boolean ToolCloseOpenPolygons = false // boolean ToolConvertArcs = true // boolean ToolConvertCircles = true // boolean ToolConvertDonuts = true // boolean ToolConvertDonutsStyle = 0 // integer ToolConvertSplines = true // boolean ToolConvertText = true // boolean ToolConvertWires = true // boolean ToolCropX0 = 0.0 // real ToolCropX1 = 0.0 // real ToolCropY0 = 0.0 // real ToolCropY1 = 0.0 // real ToolDontExplode = false // boolean ToolEraseZeroWidthPolylines = false // boolean ToolEvenOddFill = true // boolean ToolForceManhattan = false // boolean ToolHolesModeLink = false // boolean ToolJoinOpenPolygons = true // boolean ToolKeepInternalEdges = false // boolean ToolMergeZeroWidthPolylines = false // boolean ToolPolyToleranceUnits = (int)Unit::Nanometer // integer ToolPolyToleranceValue = 0 // integer ToolPolyWidthUnits = (int)Unit::Micron // integer ToolPolyWidthValue = 1 // integer ToolQuasiCircleMinFacets = 32 // integer ToolRecenterX = 0 // integer ToolRecenterY = 0 // integer ToolSelectionOutlineOnly = false // boolean ToolSelectionPercentage = 0 // integer ToolShapeFilter = 0 // integer ToolSnapToGridSpacing = 10 // integer ToolWireEndToleranceUnits = (int)Unit::Nanometer // integer ToolWireEndToleranceValue = 0 // integer ToolWireWidthToleranceUnits = (int)Unit::Nanometer // integer ToolWireWidthToleranceValue = 0 // integer XtOutExplodeArcs = false // boolean XtOutUnits = (int)Unit::Millimeter // integer